Plastic Molding Services

Custom Injection, Compression and Trasfer Molding

Process Driven, Quality Oriented and Customer Focused

Serving various industries across North America for over 75 years.






We are ISO-9001:2015/ AS9100D Registered.

Bangor Plastics is capable of short runs, small quantities and large volume service.

Compression Molding

Compression Molding is a molding process where preheated thermoset materials such as Phenolics or BMC’s among other compostites are placed directly into the heated mold cavities. The mold is then closed forcing the material into the cavity detail to produce the part. Heat and pressure are maintained until the molding material has cured. This process yields exceptional dimensional stability, thick and thin cross sections and the use of insert molding in the correct application.

Injection Molding

Injection Molding utilizes a screw-type plunger to force molten plastic material such as ABS, Polystyrene, Ryton, Nylon6 or even Phenolics among many other compounds into a mold cavity; this solidifies into a shape that has conformed to the detail of the mold. It is commonly used to process both thermoplastic and thermosetting polymers. While thermosets cure under heat and pressure and permanently set similar to concrete, thermoplastics are cooled in the mold and are able to be reprocessed similar to candle wax. This process yields faster cycle times with typically thin cross sections.

Transfer Molding

Transfer Molding is similar to compression molding but employs a piston/cylindar device for thermoset composite processing. The material is placed above the closed heated mold and is forced downward through the gate and into the mold cavities. The mold is held closed while the material cures. This process results in the molded part leaving the mold cleaner and is suited well for insert molding. This process yields good dimensional stability, medium to thin cross sections.

Secondary Options

Secondary Operations available at Bangor Plastics Inc. have grown with our business. We have setup custom work cells in some cases to accommadate lathe, keyway broaching, drill and tap operations. In some cases we have built custom equipment to serve our customers needs. We are setup for light assembly and take into consideration our customers packaging needs as well.

Request a Quote For Your Next Project!

Follow the link to fill out our quote form or call us at (269) 427-7971

Contact Bangor Plastics, Inc.

809 Washington St.
Bangor, MI 49013